Patek Philippe Cubitus 5821 replica, black dial in steel
This Patek Philippe Cubitus 5821 replica is the steel version with the darkest dial in our range. The square 45 mm case flows into an integrated bracelet, and the black dial is cut with horizontal embossing, applied batons and a date window at 3.
Wearing a 45 mm Cubitus
Our size guide puts 42-45 mm cases on wrists over 19 cm (7.5 in), so this is a watch for a larger wrist. The bracelet closes with a folding clasp.
Case
Seen from the side the case is slim and flat, with two hinge-shaped ears and a polished bar on the left. A cross is engraved on the crown, and the opened clasp shows its two folding blades with an engraving inside.
Tier
Made as SuperClone only: 904L steel, a sapphire crystal and a movement that keeps within -5/+6 seconds a day, with 40-48 hours of power reserve. Through the display back the QC photos show the movement and its gold-tone rotor. Rated 30 m.
Other steel dials
In the same steel case you can pick the blue dial that darkens toward the edge, the white dial with dark-outlined batons, the deep green dial, the turquoise dial or the olive green dial. For black with stones round the bezel, see the stone-set Cubitus with a black dial, and the 5821/1AR with a blue dial is the version with rose gold-tone centre links. Browse the Cubitus collection for every version, or read what’s new from Patek Philippe.
Questions about the black Cubitus 5821
Does the black dial look blue in some light?
Yes, in daylight it shifts toward dark navy, as the main photo shows. Under indoor light it reads black.
Can any watchmaker resize the Cubitus bracelet?
Yes. Most wrists need 2-4 links out, and any watchmaker or jeweller can do it.
Can I see this watch before it ships?
Yes. You get 8-12 QC photos and a video of this exact watch by email, usually 3-5 business days after you pay, and we send it only after your OK.




















There are no reviews yet.