Patek Philippe Aquanaut Luce 5267/200A-010 replica
The 5267/200A-010 is the all-white Aquanaut Luce. A ring of stones frames a white dial with the checkered grid, black Arabic numerals and the date at 3, and the white rubber strap continues the same colour. The case is 38.8 mm steel.
Only the SuperClone tier is offered here, with a 904L steel case, a sapphire crystal and a daily rate inside -5/+6 seconds. The bezel stones are set all the way round; their type is not listed here, and our support team can confirm it before you order. Before your watch ships you get 8 to 12 photos and a video of it.
One gallery frame was shot with the lights off. The hands and hour markers glow green there, while the black numerals stay dark. In daylight the cream-stand pictures cover the crown side, the brushed flank, the sapphire back over the movement, and the white strap whose clasp is still wrapped in film.
Luce colours close to the white one
Close to this one: the black dial Aquanaut Luce 5267/200A-001 and the khaki green Luce 5267/200A-011. White also appears in rose gold-tone on the 5268 with rose numerals. For colour in steel, pick lime green, red or navy with teal rubber; the darkest dial is chocolate brown. For a 40.8 mm case without stones, see the 5167A-001 on a black strap. You can compare every reference in all Aquanaut models, and our guide to choosing an Aquanaut explains the differences between the lines.
Questions about the 5267/200A-010
Will the white strap stay white?
It is rubber, so a wipe with a soft damp cloth keeps it clean. Keep the watch out of direct sun when you are not wearing it.
Is the stone ring the same on every steel Luce?
Yes. Black, khaki, white and the brighter steel colours all use this 38.8 mm case with one row of stones around the bezel.
Do the hands glow in the dark?
Yes. The hands and hour markers are luminous, as the night photo in the gallery shows; the black numerals do not glow.

















